How to Specify Products and Equipment in Your Office Cleaning Contract

The product and equipment section of an office cleaning contract needs three lines, and none of them names a brand.

Write each one as a result you can check: disinfectants used only where needed and exactly as the label directs, vacuums that trap fine dust, and microfiber cloths color coded and laundered between uses. Then add one paperwork clause, a product list with Safety Data Sheets that’s updated whenever a product changes. That covers the things you can’t see by walking the office in the morning.

One of those three lines costs nothing to add, and it’s the one most likely to get broken on a busy night.

Why “Contractor Provides All Supplies” Isn’t a Specification

Most cleaning agreements handle products in a single sentence. Washington State’s public janitorial contract is a typical example: the contractor “shall provide all labor, equipment/tools, and janitorial supplies necessary to perform the Janitorial Services.” Private templates say less. One widely read contract guide tells you only to “identify whether the contractor or client will provide cleaning supplies and equipment.”

That settles who pays. It says nothing about what gets used in your restrooms, how the vacuum handles dust, or whether the cloth that wiped a toilet ever touches a desk.

You don’t need a 40 page bid package to fix it. The public contracts already did the hard work, and three of their ideas carry straight over to a private office.


Specification 1: Disinfectants Used Where Needed, by the Label

Disinfectant is a registered pesticide, and the label is legally binding. Most labels carry the same line: “It is a violation of federal law to use this product in a manner inconsistent with its labeling.” That includes the dilution and the wet contact time, the number of minutes the surface has to stay wet for the product to kill what the label claims.

Contact time is the line that costs nothing to add and gets broken most. Stephen Ashkin, writing in Cleaning & Maintenance Management, called skipped dwell time “one of the most frequently occurring violations of the law.” Many disinfectants need about 10 minutes wet, and a crew that’s behind schedule can spray and wipe in seconds. The fix doesn’t cost the contractor any product, only the habit, which is why the number nobody watches belongs in writing.

The other half is where. Washington DC’s janitorial guidance tells contractors to “use disinfectants only where required.” In an office that usually means restrooms, break room counters and high touch points like door handles. Desks and glass don’t need a disinfectant at all, and neither do most floors.

So the line reads like this: EPA registered disinfectants, used on restrooms, break room surfaces and high touch points, applied per the label’s dilution and left wet for the full contact time.


Specification 2: Vacuums That Hold the Dust

A vacuum either keeps fine dust or blows it back across the desks. You can’t tell which by looking at the carpet the next morning.

There are two standard ways to write this. Green Seal’s cleaning service standard, GS-42, requires vacuums that meet the Carpet and Rug Institute’s Seal of Approval program and run below 70 decibels, with bags emptied when half full or when a sensor says so.

The other route is HEPA filtration, which EPA describes as capturing 99.97 percent of particles at 0.3 microns. Either one is a checkable fact about a machine, and what HEPA does for office air is worth knowing before you choose.

Write it as: vacuums certified under the CRI Seal of Approval program or fitted with HEPA filtration, with bags or canisters emptied at half full.

The 70 decibel cap is worth keeping if anyone in your office works late while the crew vacuums.


Specification 3: Microfiber, Color Coded and Laundered

Microfiber grabs more soil than cotton, but only while it’s clean. A dirty microfiber cloth spreads what it’s picked up the same way a rag does.

So the spec covers two things. First, colors. One color goes to restrooms and never leaves them, and the other areas get their own. Second, laundering: GS-42 requires reusable cloths to be “cleaned or laundered before reuse,” which in practice usually means a fresh cloth for each area and a laundered set every night.

Write it as: color coded microfiber cloths and mop heads, with the restroom color used in restrooms only, and every cloth laundered before it’s used again.

A spec can also do the opposite of what you meant. The most common one sounds the most careful, and all it really does is raise the bid.


The Paperwork Clause That Keeps All Three Honest

Products change. A distributor runs out, a cheaper bottle shows up, and the crew starts using it on a Tuesday. Without a clause, you’d never know.

Public contracts handle this with a product list. DC’s guidance asks for a cleaning and disinfecting product list at contract signing and again whenever products change, plus the Safety Data Sheets and labels in a binder. Washington’s contract asks for the same kind of file of product sheets and SDS.

For a private office it’s four sentences:

  • The contractor provides a list of every product used in the building, with its Safety Data Sheet, at signing.
  • The list is updated before any product is swapped.
  • Any substitute meets the same three specifications.
  • The SDS binder or electronic file stays available to the office.

The SDS part isn’t optional anyway. Federal hazard communication rules already require the contractor to give you access to them, which is covered in what your cleaner must provide.

Each spec above traces back to the tools and methods an office crew needs, if you want the detail behind it. Price and term length are the other half of the contract, and they’re in the guide to the whole office cleaning purchase.


Specifications That Only Raise Your Price

The spec that sounds most careful is a brand name. “Use Brand X disinfectant” or “Model Y auto scrubber” reads precise, but it ties every bidder to one product and one supplier, and each one prices that in. Public buyers know this. Oregon’s rules, for example, don’t allow a brand name in a specification unless it carries “or equal” language that lets bidders offer an equivalent.

These usually add cost without adding results:

  • Brand names and model numbers. Write the result (registered, HEPA, CRI certified) and let bidders meet it.
  • Disinfecting every surface every night. It costs labor and product, and on desks and glass it does nothing a cleaner doesn’t.
  • Electrostatic spraying on a fixed schedule. It’s a tool for specific situations, not a nightly line item.
  • Equipment for floors you don’t have. An auto scrubber clause in a mostly carpeted suite gets billed whether the machine comes or not.

Green certification is the judgment call. Green Seal, UL ECOLOGO and Safer Choice labels are on plenty of everyday products, and many public bids require one of them. Ask for it if you have a reason, like a LEED building, a tenant requirement or a scent free policy. Otherwise it’s a preference, and it’s fine to leave it out.


Office Cleaning Contract Language You Can Paste In

SpecificationContract wordingWhat it protects
DisinfectantsEPA registered disinfectants, used on restrooms, break room surfaces and high touch points, per the label’s dilution and full wet contact timeGerm kill you can’t see
VacuumsCRI Seal of Approval certified or HEPA filtered vacuums, bags or canisters emptied at half fullDust kept out of the air
MicrofiberColor coded microfiber cloths and mop heads, restroom color in restrooms only, laundered before reuseRestroom germs kept off desks
Product listA product list with Safety Data Sheets at signing, updated before any substitution; substitutes meet the same specificationsAll three staying true over time

Hand this table to every bidder. If two quotes come back at different prices, you’ll know it isn’t because one company planned to use a cheaper bottle.


Before You Sign

Settle one more thing in the same section, which is who supplies the restroom paper, soap and liners. That’s a separate line from cleaning products, and who pays for restroom consumables moves the price more than most buyers expect.

Then decide like this. If a contract already names results for all three, keep it and add the product list clause. If it says only “contractor provides all supplies,” add all four rows from the table before you sign. If it names brands, change them to results with “or equal” language.

Excellence Janitorial gives free estimates for offices across Northeastern Pennsylvania. Ask for the product list and the vacuum details to come with the estimate, and send every other bidder the same four rows.


Frequently Asked Questions

Who provides cleaning supplies in a commercial cleaning contract?

Usually the contractor provides cleaning products and equipment, and the contract decides who provides consumables like paper towels, soap and trash liners. Put both in writing, because “all supplies” can be read either way.

Should a cleaning contract list the products the cleaner will use?

Yes. A product list with Safety Data Sheets at signing, updated before any substitution, is how public contracts keep products from changing quietly. It doesn’t cost the contractor anything to provide.

What should a janitorial scope of work say about equipment?

It should name results rather than brands: vacuums certified under the CRI Seal of Approval program or fitted with HEPA filtration, color coded microfiber that’s laundered before reuse, and equipment kept in working order and stored by the contractor.

Can I make my cleaning company use my own products?

Yes, if the contract says so. Washington State’s janitorial contract keeps “the right to require specific janitorial supplies or equipment.” Expect the price to reflect who buys them, and make sure the contractor has the Safety Data Sheets for anything you supply.

Does a cleaning contract need to require green products?

Only if you have a reason, such as a LEED building, a tenant requirement or a scent free policy. If you do, name the certifications you’ll accept, usually Green Seal, UL ECOLOGO or Safer Choice, instead of a brand.

What does “or equal” mean in a specification?

It means a named product is an example, not a requirement, and a bidder may offer an equivalent that meets the same standard. It keeps a brand name from locking every bid to one supplier.

Ready for a Cleaner Space?

We work with businesses across Scranton, Wilkes-Barre, Kingston, and all of northeastern PA. Tell us about your space and we’ll get back to you with a no-obligation quote.